 贝意克 |
参考报价：电议 型号：BTF-1200C-SL
产地：安徽 在线咨询
|
主要特点Main features:
1) Can pull in the required high tem. to sample to get a rapid heating rate; also pull out the high tem. furnace and let the sample in the room tem. Environment to get a rapid cooling rate.
操作时可将实验需要的恒定高温直接推到样品处，使样品能得到一个快速的升温速度，同样也可将高温的管式炉直接推离样品处，使样品直接暴露在室温环境下，得到快速的降温速率。
2) Used for graphene growing or CVD experiment with RTP requirement
应用于有快速升温需要的石墨烯生长或CVD实验。
技术参数Technical Parameters
Power 输入电源 | Power rated: 3KW 额定功率：3KW |
Voltage 电压 | Voltage rated: AC208-240V 50/60HZ 额定电压： AC208-240V 50/60HZ |
Working Temperature 工作温度 | Max. Temperature: 1200℃( 1 hr) **温度：1200℃ (1小时) Continuous working temperature: ≤1100℃ 持续工作温度：≤1100℃ Max. Heating/colling Rate: ≤20℃/S 升温速率：≤20℃/秒 |
控温方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
Length of heating zone 加热区长度 | 440mm |
Length of constant zone 恒温区长度 | 200mm |
Heating Elements 加热元件 | Resistance wire, Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金） |
Temperature Accuracy 控温精度 | +/- 1℃ |
Processing tube 炉管 | Φ50/60/80/100*1400mm(optional) Φ50/60/80/100*1400mm(管径可选) Two tube blocks are included for blocking heat radiation generated from tube center， must be fully inserted into the furnace chamber before heating in the correct position(quartz or ceramic optional). 两个管堵阻挡管中心产生的热辐射，必须在加热前塞进炉膛的正确位置(石英或氧化铝管堵可选) |
Dimensions 尺寸 | Furnace size :1500*380*620mm(L*W*H without tube & flange) 炉子尺寸：1500*380*620mm(长*宽*高 不含炉管和法兰) |
Net Weight 净重 | 130kg |
真空法兰 | KF25 quick clamp flange 两端为KF25快速卡箍法兰 |
Vacuum Pressure 真空压力 | 1pa can be achieved by mechanical pump 机械泵可达1pa 10^-4 pa can be reached by molecular pump 分子泵可达10^-4pa Please click the picture below to order vacuum parts 点击下列图片订购真空部件 |
Warranty 质保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内） |
Warning 注意事项 | Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 |
Compliance 认证 | CE Certified CE认证 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 付费可进行TUV(UL61010)或CSA认证 |
Operation instructions 操作指导 | Click to download the operating manual 点击下载说明书  |
